EASY
MARKER UP+
AUTOMATIC GLASS MARKING EQUIPMENTS
GLASS MARKING, A KEY REQUIREMENT
Glass identification requirements, and increasingly stringent regulation in the field of glass for the building industry, make glass marking an important factor today. These equipments represent the ideal solution for every marking need on any type of glass.
A CLEAR AND PERMANENT MARK ON THE GLASS
Sand-jet marking equipment allows to carry out a clear and permanent mark on the glass. This fact, together with the high cost-effectiveness of the process, make this technique advantageous in comparison with other marking techniques. Considered the low investment needed and the minimal process costs, this method can represent a convenient solution for large companies as well as for small and medium sized enterprises.
EASYMARKER, AUTOMATIC GLASS MARKING PROCESS
The Easymarker models are designed for connection with other glass processing plants, in order to receive an impulse for the automatic activation of the marking process. The activation can also be done via push-button, foot-pedal and touch screen. The logo can be carried out in different positions and at different heights, thanks to the fact that the steel mask (in which the logo is engraved) can be rotated and the position of the gun head can be adjusted by the operator. The EASYMARKER is a marking device that allows to speed up the marking process providing high quality of engraving for a non-fading logo.
GLASS MARKING GETS BIGGER
Easymarker EV30 and Easymarker UP30 enable to imprint on the surface of glass and mirrors a mark with a diameter of up to 30 mm in a totally automatic way, ensuring the same quality and sharpness of marking as the standard version with 25 mm diameter. This new solution was designed to respond to the needs of a leading international company in the production and processing of flat glass, which needed to imprint on the glass surface extensive information about the compliance of their products with the international standards related to material safety in the building industry (ANSI, CFR, SCGG, UNI, EN, CE, etc.).
MODEL
EASY MARKER UP+ 25
Glass marking has never been so fast!
> Max marking area Ø 25 mm
> Designed for combination with horizontal systems
> Adjustable stroke of the marking gun
PROCESSING
STANDARD CONFIGURATION
CONSUMPTION & PERFORMANCE
Electrical consumption: 1,3kW
Compressed air consumption/gun: 350L/min
Working pressure: 6Bar
Indicative lifespan of the steel mask (marks)*: 500-900 nr
* This data may vary depending on many factors: abrasive material used, type of logo, etc.
MODEL
EASY MARKER UP+ 30
Glass marking has never been so fast!
> Max marking area Ø 30 mm
> Designed for combination with horizontal systems
> Adjustable stroke of the marking gun
PROCESSING
STANDARD CONFIGURATION
CONSUMPTION & PERFORMANCE
Electrical consumption: 1,3kW
Compressed air consumption/gun:350L/min
Working pressure: 6Bar
Indicative lifespan of the steel mask (marks)*: 200-400 nr
* This data may vary depending on many factors: abrasive material used, type of logo, etc.